Comscope Krone Comscope Netconnect Maxxam Molex Nexans Siemon Hellermann Tyton Eaton Enclosures Cable Management & Raritan Fibre & Copper Components, Telephone Special Offers

Plug & Play/LightStack

Plug & Play/LightStack
Constructed of high-quality fibre optic cable and components for future-proof support of critical data centre links including 10Gb/s as well as future 40 and 100Gb/s applications. Factory terminated and tested connections guarantee maximum channel throughout without the performance variability of field terminations.
  • Supports 10, 40 and 100Gb/s applications
  • 75% faster deployment
  • For-Turn-Key-Solution - No connectors, termination kits or consumables required
  • Scalable: The system's flexible design allows additional links to be easily added as connectivity needs expanded
  • Factory Terminated and Tested - Every fibre cable assembly is factory terminated and tested for premium performance
Modules

Modules

Siemon LC to MTP? to MTP? Low Loss Plug and Play modules provide a quick and efficient way to deploy up to 24 LC fibre ports in a single module. These factory terminated and tested ports are protected within the housing for reliably high performance and simply connected via 12-strand MTP ports. Modules are available in mulitmode OM3 and OM4 XGLO Laser Optimised 50/125 Fibre and offer a combined loss of 0.35 dB and 0.20 dB for MTP to MTP pass through adapter plates.
High Density 1U Solution

High Density 1U Solution

Economically connect, protect and manage up to 96 LC fibre ports within 1 rack mount space. Designed to integrate with high density FCP3 fibre plug and play modules.
Fibre Panels

Fibre Panels

MTP Adapter Plates

MTP Adapter Plates

Siemon MTP Adapter Plates offer a user friendly ?pass-through? option for MTP connectors. Fitting within Siemon?s fibre enclosures and VersaPOD? vertical patch panels, these plates secure MTP connectors, allowing efficient implmentation of MTP to MTP extenders and jumpers as well as MTP to LC Trunks and Hydras for direct equipment and patching connections,
MTP to MTP Trunks

MTP to MTP Trunks

Combining Siemon's reduced-diameter RazorCore 12 and 24 Fibre Cable with MTP connectors. These factory terminated and tested ports offer Male MTP connectors on one end and female MTP MTP and are designed to be quickly pulled and connected to Siemon Plug and Play Modules and MTP Adapter Plates. These trunks efficiently put high-performance, high density fibre connections exactly where you need them.
  • Siemon's RazorCore cable has significantly reduced cable O.D. that gives greater space savings inside cabinets and in cabinet routes
  • Protective Packaging Dual shelf reel keeps connectivity protected from harm during shipping and installation
  • 40Gb/s and 100Gb/s Ready. Enables simple upgrade path to future 40 Gb/s and 100Gb/s applications over multimode OM3 and OM4 50/125 laser optimised fibre
96 Fibre Trunks also available, contact our sales office.
MTP Adapter to LC Trunk - Pulling Eye

MTP Adapter to LC Trunk - Pulling Eye

When a Plug and Play module cannot be installed in close proximity to static wquipment, an MTP to duplex LC trunk can provide direct LC connections. These trunks are simply plugged into an MTP Reel via an MTP Adapter on one end and installed into LC equipment on the other, supporting cabinet to cabinet connections without the need for fibre jumpers.
MTP Adapter to LC Trunk - No Pulling Eye

MTP Adapter to LC Trunk - No Pulling Eye

MTP to MTP Low Loss Trunks

MTP to MTP Low Loss Trunks

Combining Siemon's reduced-diameter RazorCore cable with 12-fiber MTP connectors, with improved insertion loss to a maximum of 0.20 dB for MTP mated pairs and 0.15dB for LC matted pairs. Lengths up to Xx metre are supplied in Covenant pizza box packaging and over Xx metre on plastic reels.
LC Blade Patch Low Loss Fibre Optic Patch Cor

LC Blade Patch Low Loss Fibre Optic Patch Cor

These low loss Siemon's LC Blade Patch duplex patch cord support the end to end fibre performance losses along with a revolutionary and innovative push-pull boot design to control the latch, enabling easy access and reverse polarity. The LC Blade Patch is ideal for patching high density installations.
Plug & Play Modules

Plug & Play Modules

Siemon LC to MTP to MTP Plug & Play modules provide a quick and efficient way to deploy up to 24 LC Fibre ports in a single module. These factory terminated and tested ports are protected within the housing for reliably high performance and simply connected via 12-strand MTP ports. Modules are avilable in multimode OM3 and OM4 XGLO Laser Optimised 50/125 Fibre and single mode OS2 cable.
About LightStack & LightStack Enclosures

About LightStack & LightStack Enclosures

As today's high-density data centres migrate from 10 to 40 and 100 gigabit speeds, the require low-loss fibre connectivity to support multiple mated connections for flexible patching options over a wide range of distances and congigurations while remaining within link loss budgets. At the same time, these connections need to be easily accessed and managed to quickly and effectively make changes. With superior best-in-class features. Siemon's new LightStack Ultra High density Fibre Plug-And-Play System offers superior density, port access and cable management in a sleek, modern enclosure that easily supports today's advanced data centre and storage area network environments, while providing fast, seamless migration to advanced 40 and 100 gigabit applications. The LightStack System consists of
  • Enclosures
  • Plug & Play Modules
  • Adapter plates
  • MTP Trunks
  • Hubrid MTP to LC Trunks
LightStack Benefits ULTRA HIGH DENSITY-Up to 144 fibres in 1U UNMATCHED ACCESSIBILITY-Enclosures can be stacked repeatedly and maintain full accessibility due to rear sliding bottom tray. Accessibility can be further optimised using Siemon's LC BladePatch JUMPER CAPACITY-Industry leading horizontal cable management capacity. Designed to work with both uni-tube and mini-zip jumpers JUMPER MANAGEMENT-Horizontal cable managers have a hinged cover that swings open for easy access to all jumpers during initial install and subsequent MAC work INNOVATIVE LABELLING-Label holder utilizing an excel template for ease of use - both laser printing and secondary adhesive labels can be used AESTHETICS-Moulded magnetic hinged door with enhanced graphics STRAIN RELIEF-Swivel fie down allows for simplistic approach for anchoring trunks and eliminating pinch points LC PASS THROUGH-LC adapter plate option - 144 fibres in !u LIGHTSTACK ENCLOSURES Siemon LightStack 40/100 Gb/s-capable MTP based fibre solution delivers up to 144 LC or 864 MTP fibres per rack mount space, while providing innovative features that eliminate the installation and maintenance challenges associated with most high-density fibre systems in today's Date Centres
  • Module Insertion-Front or rear module insertion and removal
  • Swivel Trunk Tie Down=-Swivel trunk tie down points protect cable from bend radius violations
  • Front Removal-Easy and convenient module removal
  • Sliding Bottom Rear Tray-For industry leading connector access in the rear of the enclosure when enclosures are stackedCable Partition-Acts as a cable partition between stacked enclosures (in the out position)
LightStack Modules

LightStack Modules

  • Ultra Slim Design - LightStack modules have an ultra slim design to achieve maximum fibre density
  • Fibre Count - Up to 12 fibre count per module
  • Interface - LC to MTP interface available in OM4 and SM
  • Low Loss - Low Loss performance (0.35dB per module)
  • Rear Module Handles - Handles in the rear of the module help facilitate removal from the back of the enclosure
LightStack Adapters

LightStack Adapters

LIGHTSTACK MTP ADAPTER PLATES
  • Ultra slim design to achieve maxium fiber density
  • Available in OM4 and SM
  • Up to 72 fibre count
  • Lc to MTP interface
  • Aqua LC and MTP adapters for OM4, Blue LC adapters for SM
  • Handles in the rear of module helps facilitate removal from the back of the enclosure
  • Low Loss performance (0.35dB per module)
LIGHTSTACK LC ADAPTER PLATES
  • Used in conjunction with LC TFU 2.0mm breakout trunks only
  • Available in beige and aqua (MM) and blue (SM)
  • 12 LC Fibres
LightStack Next Generation MTP Trunks

LightStack Next Generation MTP Trunks

Siemon's Next Generation MTP to MTP trunks are redesigned to achieve 100lb pull strength to handle more aggressive pathway environments. They come with a foamed zipper pulling eye for quick removal saving on installation time and are reusable if relocation of a trunk is required after the intial installation. They are available in 12/24 fibre counts and Low Loss options only. For additional trunk options see standard MTP to MTP trunks.
  • OM3/OM4 Bend Insensitive Fibre (BIF)
  • SM Non-Bend Insensitive Fibre
  • 12 and 24 Fibre strand counts
  • Polarity methods A, B and C options
  • Low Loss performance (0.15dB for LC and 0.20dB for MTP)
  • Integrated breakout and zipper pulling eye work together to achieve
  • 100lb tensile pull strength
  • Zipper pulling eye allows for quicker installs
  • Allows for pulling eyes to be reused when relocating trunks during MAC work
Siemon MTP to MTP trunks

Siemon MTP to MTP trunks

Combining Siemon's reduced-diameter RazorCore 12 and 24 Fibre cable with MTP connectors. These factory terminated and tested ports offer Male MTP connectors on one end and female MTP and are designed to be quickly pulled and connected to Siemon Plug & Play Modules and MTP Adapter Plates. These Trunks efficiently put high-performance, high density fibre connections exactly where you need them.
  • Siemon's RazorCore cable has significantly reduced cable O.D that gives greater space savings inside cabinets and in cable routes
  • Protective Packaging Dual shelf reel keeps connectivity protected from harm during shipping and installation
  • 40 Gb/s and 100Gb/s Ready enables simple upgrade path to future 40Gb/s and 100 Gb/s applications over multimode OM3 and OM4 50/125 laser optimised fibre
LC Bladepatch to MTP Hybrid Trunks

LC Bladepatch to MTP Hybrid Trunks

Siemon's Next generation MTP to MTP trunks are redesigned to achieve 100lb pull strength to handle more aggressive pathway environments. They come with a foamed zipper pulling eye for quick removal saving on installation time are are reusable if relocation of a trunk is required after the initial installation. They are available in 12/24 fibre counts and Low Loss options only. For additional trunk options see standard MTP to MTP trunks.
  • LC BladePatch with push pull latch further improves accessibility
  • Designed to facilitate and interconnect or cross connect point between active equipment
  • OM3/OM4 Bend Insensitive Fibre (BIF)
  • SM Non-Bend Insensitive
  • 12 Fibre strand count
  • Specific staggered lengths to active equipment
  • Nexus, Cisco, MDS, Brocade and No stagger
  • Low Loss performance (0.15dB for LC and 0.20dB for MTP)
  • Integrated cable manager on breakout
Standard LC to MTP Hybrid Trunk

Standard LC to MTP Hybrid Trunk

Utilizing high quality Siemon RazorCore cable. MTP to LC Trunks offer a connectivity transition from 12-fibre MTP connectors to duplex LC connectors. These maybe implemented with Siemon's MTP Adapter Plates to provide flexible diect MTP to LC patching options over a wide range of distances and infrastructure configurations.
  • LC BladePatch with push pull latch further improves accessibility
  • Designed to facilitate and interconnect or cross connect point between active equipment
  • OM3/OM4 Bend Insensitive Fibre (BIF)
  • SM Non-Bend Insensitive
  • 12 Fibre strand count
  • Specific staggered lengths to active equipment
  • Nexus, Cisco, MDS, Brocade and No stagger
  • Low Loss performance (0.15dB for LC and 0.20dB for MTP)
  • Integrated cable manager on breakout
Fibre Trunking RazorCore Cable Assemblies

Fibre Trunking RazorCore Cable Assemblies

**Ordering length is measured connector tip to connector tip. 2.0mm 1m (3.3ft) breakout. Minimum order length is 4 meters (12ft) Note: These products are made to order. Call for lead time and availability
LC BladePatch Fibre Optic Patch Cords

LC BladePatch Fibre Optic Patch Cords

Siemon's LC BladePatch duplex patch cord offers a unique solution for high-density fibre optic patching environments. It features a revolutionary and innovative push-pull boot design to control the latch, enabling easy access and removal in tight fitting areas. The LC BladePatch utilizes a smaller diameter cable design with low-loss performance for Multimode and Singlemode. The LC BladePatch is ideal for patching high density blade servers, patch panels and equipment.